Total: EGP129,745.00
Product Description
Impression coping are defined as the machined attachments that, connecting to the coronal part of the implant within the oral cavity and axially fixed by the impression screw, are used to make the transfer of the position of the implant in the biological medium to a laboratory model, on which the prosthetic will work to create the dental crowns or prostheses. This process is achieved using impression materials placed in an appropriate manner, that
will harden in the oral cavity and produce the negative of the patient’s mouth. Once extracted, replicas are placed and the casting plaster is poured to obtain the positive mould where the replica will be placed in the original position of the implant in the mouth.Machined open tray impression coping in grade V titanium according to ISO-5832.
| Item Name | Dental Open Tray impression coping (WP)(long) |
| Brand Name | Frontier |
| Model Name / Code | 1104KDSOF3605 |
| Manufacturer | ilerimplant group |
| Country of origin | Spain |
| Technical Specifications | Raw Material: Pure Titanium Grade 5 / Platform: WP / Shoulder diameter: 5.5 mm / Total length: 12 mm / Height: 10.2 mm |
| Package | 1 Screen-printed cardboard envelope contains 2 chamber bubble sealed by a glued medical grade sealing paper. First chamber contains OT impression coping and the other contains Long Fixing Screw |
| Variations | |
| Manufacture Date | |
| Expiry Date | |
| Guarantee terms | |
| Remarks | The recommended tightining torque for OT impression coping is 15 N.cm |
Frontier
1009KDAOF3610
ilerimplant group
gmi frontier internal connection hexagonal implants are machined in c.p. grade IV titanium of the highest quality, thus ensuring a high chemical stability and excellent biocompatibility. The titanium oxide layer, that is formed on the implant surface after the passivation process, and the careful design of the outer surface of the thread, guarantee good osseointegration …
Continue reading Dental Implant (RP) D 3.75 mm L 15 mm
Frontier
1011KDAOF3630
ilerimplant group
gmi frontier internal connection hexagonal implants are machined in c.p. grade IV titanium of the highest quality, thus ensuring a high chemical stability and excellent biocompatibility. The titanium oxide layer, that is formed on the implant surface after the passivation process, and the careful design of the outer surface of the thread, guarantee good osseointegration …
Continue reading Dental Implant (RP) D 4.25 mm L 6.5 mm
Frontier
1094KDGOF0029
ilerimplant group
Following the first stage of surgery and therefore after implant osseointegration is achieved, the multi-esthetic abutment (MEA) is used, that is defined as the machined attachment that, after being attached to the crown of the implant, serves as a support for a multiple restoration, thus decreasing the height between the implant connection and the structure …
Continue reading Dental Multi-esthetic Temporary Cylinder (WP)
Frontier
1084KDGOC3604
ilerimplant group
Following the first stage of surgery and therefore after implant osseointegration is achieved, the multi-esthetic abutment (MEA) is used, that is defined as the machined attachment that, after being attached to the crown of the implant, serves as a support for a multiple restoration, thus decreasing the height between the implant connection and the structure …
Continue reading Dental Multi-esthetic straight abutment (RP) h 4 mm
Frontier
1052KDMOF3601
ilerimplant group
Once the mucosal tunnel has been formed by the healing abutment and after removing it from this location, it is appropriate to use the abutment, which is defined as the machined tapered attachment that, after being fixed with the clinic screw to the top of the implant, acts as a support for the clinic crown …
Continue reading Dental Implant Straight Abutment (RP) h 1.5 mm
Frontier
1108KDCOF3611
ilerimplant group
To replace a dental crown with a restoration dental prosthesis, a castable is used, which is defined as a meltable plastic machined attachment that, once positioned over the coronal part of the internal connection implant, will be the initial basis to model the form of the final structure, to be cast in the corresponding metal.
